How To Setup LinkSys Wireless Network Connections
The advent of wireless network has made using the internet easier. With the help of a wireless network, you will be able to browse over the internet, access internet files, access printers on the network, and take leverage of the various other aspects as well. What makes wireless networks great to work with is the fact that you don't have to sit in one place for surfing the internet or working over the network. Different wireless routers have different range - so you can move around with your laptop from one room to another and yet get to browse over the internet. It is all about comfort and convenience!
One of the most important instruments required for enabling wireless network connections is the router. A router is an instrument that can convert any signals being sent across your broadband connection into a wireless broadcast. One of the best wireless routers are manufactured by LinkSys. So if you have bought a LinkSys wireless router to connect to the internet then here's how you can make the connections.
Connecting your LinkSys wireless router
Here is a step by step procedure that you can follow to set up the LinkSys wireless network connections. 1. First and foremost, you will need to locate the DSL or cable modem and turn it off 2. The next step is to connect the wireless router to the modem. The connection should be such that your modem will remain connected to the internet. Once all the wires have been hooked, your computer will automatically get connected to your LinkSys router, which will send all the communications to the internet using your modem. 3. On the other hand, if your computer is not connected to the Internet, then you can plug one end of your network cable that is a part of the router into the modem and at the same time plug the other end of your network cable to the WLAN or WAN port present on the LinkSys wireless network. 4. If your existing scenario is: Your computer is connected to the LinkSys router then what you need to do is unplug your network cable that is connected to the WLAN, WAN or the internet port. You have to now plug the router cable into the WLAN or WAN port. Unplug all the other network cables and plug them in all the other ports available on the LinkSys wireless router. 5. Now you can plug in the DSL modem. Wait for a couple of minutes for the modem to connect to the internet and then turn the wireless router on. Once the WAN or WLAN light on your LinkSys router starts blinking, it means that your laptop or computer is now connected to the internet. Configure your wireless router To configure your router you need to first open internet explorer and type the router address to open the router detail page. You might be prompted for a password. The password will depend on the type of LinkSys router you have and it is better to refer to the instructions mentioned on the router to get a clear understanding.
Wireless Internet For Laptop Computers >> Privacy Policy
| 
